[Moon-net] [Moon] from 4O

[w2drz]

Hi All,

Would expect that have overload problem,
since may not have much for extra parts ??

If you have a "T" connector for preamp input add a 1/4 wave shorted stub
for your receive frequency out of a piece of coax in front of preamp
also can add one to the output coax if have the parts also.

See if that improves your receive system, a correct stub will have very
small loss to the receive front end, the output stub will be a "NO"
damage filter improvement 20 db or more insertion notch rejection using
them to be expected as I recall.


Tom W2DRZ


OK1DFC wrote:
> 
> Hi all,
> we are on air but with non expecting problems. More details you will see on web tomorrow where are pictures. 50m from our dish is mast with profi digital service on CDMA and we have strong noise on the 432. But we are able to hear Sun noise and also own echo. So we have now turn polarization to vertical because QRM is lower now. So we will be QRV on 432,045 at 4th of Jun at 04:00. We have worked today Jan DL9KR as a his #99 DXCC on 432 with very good signal O/449. SO tomorrow we will try again G4YTL. Dave where around and copy him "O", but not final RRR and N.C. QSO JT65B tested also and working well. I will be again on ON4KST and HB9Q chat for possible sked how described on my web page.
> GL and looking for us
> 
> Zdenek - OK1DFC & Zdenek - OK3RM from Monte Negro - 4O/OK1DFC
> www.ok1dfc.com
> QRV 144 - 1296 MHz EME
> QRO and 10m DISH
> WAC 432 - 1296 MHz
> 
> _______________________________________________
> Moon mailing list
> Moon at moonbounce.info
> http://www.moonbounce.info/mailman/listinfo/moon
> 
>  Please enter/update your standings:
>  http://www.vhf-dx.net/top.html
> 
>  When you decide to remain anonymous I may consider this unpolite and remove you from the list

-- 

http://www.w2drz.ramcoinc.com/index.htm