[Moon-net] Lightening protection GUARANTEED

steve gross w9oji at yahoo.com
Sun Jul 13 10:03:12 CDT 2008


Hello Gentlemen

I lived in the thunderstorm capital of the america for years. I was hit 
often until I discovered a solution which is an expansion of the lightening 
rod idea.

It consists on a shallow, round cone in the shape of an umbrella at the very top of all my towers. It hangs downward from the very top of the mast.

I get a piece of 3 foot by three fot hardware cloth with 1/2 inch mesh.

It's galvanized metal screening.

I cut a 3 foot diameter disc out of it and then remove a pie shaped section
so that it can be formed into a shallow cone later.

THE TRICK THAT MAKES IT WORK IS THIS.

WITH A PAIR OF WIRE CUTTERS, PLAN TO SPEND HOURS CUTTING AS MANY OF THE WIRes AS YOU CAN AND WITH LONG NOSED PLIERS, BEND THEM UPWARD.
Leave enough intact so it won't fall apart.

YOU NOW HAVE A SHALLOW UMBRULLA OF SORTS HANGING FROM THE VERY TOP OF THE V=
ERTICAL MAST WITH HUNDREDS OF SHARP WIRES POINTED UPWARD.

I've seen them in commercial use on the interstate highways in the USA at 
the truck inspecion stops. They place them on lamp posts around the inspection stations.

TRUST ME! iT WORK.

Slip it over the top of the mast and secure it with a hose clamp and use some sort of horizontal piece across the bottom, open end,of the cone to tie it to the mast with a "U" bolt.

It dissapates the leader stroke which preceeds the main lightening strike.

I've had them on all y towers for ten years and haven;t had a strike since.

It's flimsy and not a work of art, but it works.
Steve N4PZ      




      


More information about the Moon-net mailing list