[Moon-net] QSL cards

Edward Cole kl7uw at acsalaska.net
Sun Feb 3 15:16:52 CST 2008


On this topic, I have decided not to subject anyone to criticism on 
their response to my QSLs.  I was behind for almost a year due to 
nothing other than having lots of other things to do; not updating my 
QSL for new QTH address (not good excuses).

I decided to add a couple columns to my eme initials log to show QSL 
received and sent.  This lets others know when I sent them their QSL 
and if I received their QSL.  So far only the 2m eme and meteor 
scatter logs are complete.  They are at:
http://www.kl7uw.com/emelog.htm
http://www.kl7uw.com/mslog.htm

I am QSLing all eme initials 100%.  I am hoping for a return 
card.  Thank you if you sent one to me.
---------------------------------------------------------------
Current status on 2m QRO is the Swan HVPS has been tested without 
load at 2900-volts and HV applied to the HV switch in the 
bias/meter/control panel.  Today we should be starting on finishing 
of the 8877 RF compartment/panel.  I separated these two functions so 
that the control panel and HVPS could supply amplifiers on other 
bands (e.g. 50-MHz and 1296-MHz).  I am not sure that I will be QRV 
for the Digital DUBUS/REF Contest weekend (Feb. 9/10) as my FT-847 
has developed a receiver problem.


73,
Ed - KL7UW
======================================
  BP40IQ   50-MHz - 10-GHz   www.kl7uw.com
144-EME: FT-847, mgf-1801, 4x-xpol-20, 185w
DUBUS Magazine USA Rep dubususa at hotmail.com
====================================== 




More information about the Moon-net mailing list