[Moon-net] Elevation position indicating.

[F1TE]

I have a project in progress with F1HDI and F5DJL for elevation sensor with 
analogical chanel.
Connection until 1km by line RS485 2 wires.
Two analogical channels in addition to the information of elevation.
With also the temperature of the antennas!!
All in the same message.

Photographs of the prototypes:
http://www.f1te.org/inclinometre/

73, Lucien F1TE

----- Original Message ----- 
From: "Trevor Benton" <tbenton at bigpond.net.au>
To: <moon-net at list-serv.davidv.net>
Sent: Tuesday, September 18, 2007 12:46 PM
Subject: [Moon-net] Elevation position indicating.


> Hello Erwin - MSI in Virginia sell a "Anglestar" inclinometer which was
> $237 US when I purchased mine about 2 yrs ago.  They are very accurate
> & have a resolution of 1/10th degree with a nice readout.
> I used inexpensive twisted pair data cable to connect the sensor to the
> display & nothing has given any trouble.
> One downside is they will not ship outside the US but all you need is a
> contact to forward it on.
>
> 73`s, Trevor, VK4AFL.
>
> _______________________________________________
> Moon-Net posting and subscription instructions are at 
> http://www.nlsa.com/nets/moon-net-help.html
>