[Moon-net] Power Divider

[EXT-Maetta, John]

That's because MoonNet truncated the link.  Hope the one below works. 

http://71.102.216.29/Amateur%20Radio%20II/144%20MHz%20Power%20splitter%2
0plans.htm

-----Original Message-----
From: John Peters [mailto:john.peters at iae.nl] 
Sent: Wednesday, September 12, 2007 2:22 PM
To: EXT-Maetta, John; moon-net at list-serv.davidv.net
Subject: RE: [Moon-net] Power Divider

If the link supplied in the message below does not work try the original
site.... just get your info at the source :-)

http://home.iae.nl/users/pe1ogf/power.htm

73! De John PA5MS (ex pe1ogf) 

-----Oorspronkelijk bericht-----
Van: moon-net-bounces at list-serv.davidv.net
[mailto:moon-net-bounces at list-serv.davidv.net] Namens EXT-Maetta, John
Verzonden: woensdag 12 september 2007 22:50
Aan: moon-net at list-serv.davidv.net
Onderwerp: Re: [Moon-net] Power Divider


Try this one...
http://71.102.216.29/Amateur%20Radio%20II/144%20MHz%20Power%20splitter%2
0plans.htm



-----Original Message-----
From: tom [mailto:tloebl at verizon.net]
Sent: Tuesday, September 11, 2007 2:04 PM
To: moon-net at list-serv.davidv.net
Subject: [Moon-net] Power Divider

One more time, till I get it right...I am looking for a four port power
divider with N conncetors for 2 meters for feeding 4 yagis. These units
are coaxial 1/2 wave long assemblies made of square or round tubing with
the transmitter input at the center (1/4 wave point).

Tom
_______________________________________________
Moon-Net posting and subscription instructions are at
http://www.nlsa.com/nets/moon-net-help.html


_______________________________________________
Moon-Net posting and subscription instructions are at
http://www.nlsa.com/nets/moon-net-help.html