[Moon-net] 2 receivers with the same antenna

[John Peters]

Gabriel,

I normally use a simple CATV splitter.. they are 75 ohm but Works fine gives
about -3.5dB out on each port. They realy don't cost that much and are easy
to connect with the F connectors. These splitters work in a range of 5-860
MHz

73! De John PA5MS

-----Oorspronkelijk bericht-----
Van: moon-net-bounces at list-serv.davidv.net
[mailto:moon-net-bounces at list-serv.davidv.net] Namens Gabriel - EA6VQ
Verzonden: zaterdag 17 november 2007 17:44
Aan: Lista-MoonNet
Onderwerp: [Moon-net] 2 receivers with the same antenna

Hi,

Might be this is a silly question, but I can't find very much information
about this subject using Google.

What is the right (lowless) way to connect two 144 MHz receivers to a single
antenna?

I want to make some tests comparing the reception of my usual receiver
against an SDR-IQ receiver. What kind of splitter should I use?

73. Gabriel - EA6VQ
=====================================================
Web-Site: HTTP://www.vhfdx.net
VQLog: HTTP://www.vqlog.com
VHF-UHF Propagation warnings by E-Mail:
        HTTP://www.vhfdx.net/spots/warnings.php
=====================================================


_______________________________________________
Moon-Net posting and subscription instructions are at
http://www.nlsa.com/nets/moon-net-help.html