[Moon-net] 13V DC bias for Spectrian SCPA1063W

[Joe Ruggieri]

25MA for each PA board so plan on a 100MA to be safe for the 13V enable.

Joe KI4NPV


----- Original Message ----- 
From: "Conrad G0RUZ" <conrad at g0ruz.com>
To: "'Moon-Net'" <moon-net at list-serv.davidv.net>
Sent: Saturday, June 02, 2007 7:43 PM
Subject: [Moon-net] 13V DC bias for Spectrian SCPA1063W


> Does anyone know how much current the 13V bias needs to switch the finals on
> in a Spectrian SCPA1063W? This is the voltage applied to Pins 7, 12 and 17
> on final boards? I am thinking of supplying it directly from the +12v on TX
> pin on my DB6NT transverter.
>
> 73
>
> Conrad G0RUZ
>
>
>
> _______________________________________________
> Moon-Net posting and subscription instructions are at
http://www.nlsa.com/nets/moon-net-help.html
>