[Moon-net] Yaesu G-5400B rotor control

[Hugh Duff]

My reply to Bill's post on moon-net was intentional for the reason that 
Bernd suggested.
It's common practice to echo replies to questions on the reflector to 
which it was posted for the benefit of others.
I learned much of what got me on the moon by "reading the mail". 
I have absolutely nothing to gain otherwise.

73 de Hugh VA3TO
www.va3to.com


Darrell wrote:
> Hi Gang...EME'ers as well, hi
> But EVERY ONE OF THEM REPLY TO ALL????   I some how Dough That 
> Bernd........I personally believe it has become a BAD Habit and like 
> MOST Bad Habits.......the become HARD to break.
> It is nearly as BAD as a Bad Virus >:-}
>
> Regards & Have Fun Darrell
>
>
> At 06:27 PM 1/20/2007, DF2ZC Bernd wrote:
>
>   
>> Because it might be of interest also to others, Darrell.
>>
>> vy 73 Bernd DF2ZC (JO30RN)
>> __________________________
>> Website: www.df2zc.de
>> ICQ    : 273214349
>> 144 MHz EME NewsLetter: www.df2zc.de/newsletter
>> ____________________________
>> 144 MHz DXCC #21
>> 144 MHz WAC
>>
>>
>> Kenwood TS 2000
>> 2 x GU74b by LZ2US
>> 4 x 2M18XXX 21 dBd full elevation
>>
>>
>> -----Original Message-----
>> From: moon-net-bounces at list-serv.davidv.net
>> [mailto:moon-net-bounces at list-serv.davidv.net] On Behalf Of Darrell
>> Sent: Samstag, 20. Januar 2007 23:14
>> To: w2drz; Bill Hudson
>> Cc: moon-net at list-serv.davidv.net
>> Subject: Re: [Moon-net] Yaesu G-5400B rotor control
>>
>> Can anyone explain to me why private message mail needs to be sent to the
>> WHOLE Reflector List???  Got me Licked.....BUT not Beaten
>>
>> Darrell
>>
>> At 05:54 PM 1/20/2007, w2drz wrote:
>>
>>     
>>> Hi,
>>>
>>> Look at this web site for info, several pages to look at.
>>>
>>> http://www.w2drz.ramcoinc.com/index.htm
>>> http://www.w2drz.ramcoinc.com/din8jack.htm
>>>
>>> tom W2DRZ
>>>
>>> Bill Hudson wrote:
>>>       
>>>> Hello everyone,  I am new to this reflector so I hope this post
>>>>         
>>> is ok.  I have a Yaesu G 5400 rotor that I would like to add a
>>> computer interface too and what would be a good computer program to
>>> use with it?  Thanks Bill, WA0KBZ
>>>       
>>>>   Bill Hudson,WA0KBZ
>>>>   Cuba, Mo. EM48hb
>>>>   www.wa0kbz.org
>>>>