[Moon-net] [Moon] Blower relay

[Jerry Kleker]

Hi Oene,

Have you tried putting a diode in series with one of the leads....
then shorting the diode (with the relay) for high speed?

73 es GL,

Jerry    W7QX

  ----- Original Message ----- 
  From: Oene Spanjer<mailto:pa3cwn at tele2.nl> 
  To: Moon-Net<mailto:moon-net at list-serv.davidv.net> ; Moon<mailto:moon at moonbounce.info> 
  Sent: Sunday, August 19, 2007 11:32 AM
  Subject: [Moon] Blower relay


  Hello All,

  Maybe a bit off topic, but think surely one can help me with this.
  I have a blower which runs at 150V AC for cooling the GS35b 
  but want to let it run at normal 230V AC during transmit periods.
  I already tried a conventional relay to switch the motor's both 
  wires between the two voltages, but that leads to lots of sparks and
  black contacts in the relay.
  So I am in need of a circuit schematics of a solid state relais that
  can switch between each voltage.

  Thanks in advance 

  73 Oene
  _______________________________________________
  Moon mailing list
  Moon at moonbounce.info
  http://www.moonbounce.info/mailman/listinfo/moon

   Please enter/update your standings: 
   http://www.vhf-dx.net/top.html

   When you decide to remain anonymous I may consider this unpolite and remove you from the list