[Moon-net] 3456 EME

[Mark GM4ISM]

Brian,
Whilst I am not QRV yet, I do have a 9cm transverter, and a couple of the 
Toshiba PAs also.
Of course this would not be needed to work you, the 14W I run now would be 
more than adequate even if I am linearly polarised.
I have got an old c Band feed for the 2.4m  dish. All I would need is a 3456 
RX converter
I have no immediate plans to be active with a fully implemented system, but 
it would not take much to get a basic system running. I will probably be 
there if you get yourselves on 9cm!

Cheers
Mark GM4ISM
www.dc2light.co.uk
----- Original Message ----- 
From: <w6by at rcn.com>
To: <moon-net at list-serv.davidv.net>
Sent: Wednesday, April 11, 2007 8:20 PM
Subject: Re: [Moon-net] 3456 EME


> All,
>
> The 30 meter (97 Ft) dish at Jamesburg is set up for 4 and 6 GHz
> RH/LH circular polarization, so if I can make a transverter
> with about 80 watts (I have two of the 40-watt PA's) then
> almost anyone should be able to hear us on 3456.  Any interest?
>
> By the way, we're going to try 2 meters and 10 GHz this weekend, so if 
> anyone is around you might want to listen for our pings.
>
> Our primary mission for this work party is to get automatic tracking 
> running on the Vertex controller.
>
> 73,
>
> Brian W6BY
> w6by at rcn.com
>
> _______________________________________________
> Moon-Net posting and subscription instructions are at 
> http://www.nlsa.com/nets/moon-net-help.html
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 269.2.0/756 - Release Date: 10/04/2007 
> 22:44
>
> 



-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.2.0/756 - Release Date: 10/04/2007 22:44