[Moon-net] waveguide relay

[Darrell]

I suspect you have an AC Coil, rather than DC, thus the HIGH Current
Regards & GL, Darrell

At 09:38 AM 4/6/2007, DEHAYS Dominique wrote:
>Hello ,
>
>I am looking for the connector pinout on a SIVERS LAB (sweden) WR90 relay
>model is 7207X. ( 6 pins connector)
>I found it is a 24V device , I can make it switch by applying 24V between
>pin B and E , but it is not a latching relay , and it draws 1.2amp
>continuously when switched , I doubt it is the way  to use it  ( this is
>more than 2.5a on the 12V PSU only for the relay!) , so probably there is
>something I don't know : any help?
>73 Dom/F6DRO
>
>_______________________________________________
>Moon-Net posting and subscription instructions are at 
>http://www.nlsa.com/nets/moon-net-help.html
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.446 / Virus Database: 268.18.26/748 - Release Date: 
>4/5/2007 3:33 PM